Motcom BeCOMS BCom, Руководство пользователя, Страница: 71 / 82

motcom® BeCOMS® | BCom
User Manual
Release
130301 (revision 190211)
Page 8.3
• Push the components over the cable starting with the adapter (Pos. 1),
coupling nut (Pos. 2) and the seal/strain relief element (Pos. 3),
• Cut away the outer insulation approx. 23mm from the end of the cable.
• Push back the braided shield.
• Push the shielding disc (Pos. 4) over the wires and press it against the
braided shield.
• Cut back excess of braided shield close to the shielding disc.
• Cut away the plastic foil, filling material and inner insulation.
• Cut away insulation of wires approx. 3.5mm from the end and twist them.
• Solder brown wire of brown/black pair into pin No. 2 on plug.
• Solder red wire of red/black pair into pin No. 3 on plug.
• Solder black wire of brown/black pair into plug’s Pin No. 4.
• Cut off black wire of red/black pair.
• Add the distance ring (Pos. 5) between the shielding disc (Pos. 4) and insert
ring (Pos. 6).
• Push taper sleeve (Pos. 7) over the insert ring (Pos. 6) and distance ring
(Pos. 5). Make sure the Coding rib is on the right position!
• Push in cable with shielding disc (Pos. 4) and seal and strain relief element
(Pos. 3).
8.1.3. Assembling the plug
(Part. No. 9 300 12 10000 and 9 300 12 20000)
Pos. 7 Pos. 6 Pos. 5 Pos. 4 Pos. 3 Pos. 2 Pos. 1
Fig. 8.3. Mounting the plug part. no. 9 300 12 10000 and 9 300 12 20000