Motcom BeCOMS BCom, Руководство пользователя, Страница: 34 / 82

motcom® BeCOMS® | BCom
User Manual
Release
130301 (revision 190211)
Page 3.6
3.4.1. Alarm Resetting
• In case of a Pre-Alarm triggered:
If the conditions for a Pre-alarm are not confirmed after pre-set time period, the
Pre-Alarm will be reset automatically by the system.
• In case of a Main-Alarm triggered:
The Main Alarm will not be reset automatically by the system even after the
conditions that led to it are not met any more. Main Alarm can only be reset
manually at the BCom Evaluator by pressing the RESET button for 3 seconds.
• In case if Over-speed Alarm triggered:
Over-speed Alarm is not being reset automatically by the system either! It must
be reset by pressing the RESET button at the Evaluator for 3 seconds
Attention: Main-Alarm cannot be reset through the Data_Logger software, but only
at the BCom Evaluator by pressing the RESET-Button for 3 seconds.
3.4.2. Error Resetting
• In case of a System Not Ready status:
Only if all conditions for System Ready status are re-established (e.g. the problem
indicated on the LC-Display of BCom Evaluator is fixed by the operator), the
System Ready status will be reactivated automatically by the system.
Exceptional case: In case of a communication error, the Evaluator has to be
restarted to reactivate the System Ready status!
!