05/09/05 M43-3 (TF Integrate)_EN
ENGLISH
ENGLISH
M
43.3
LIGHTING TOWER MAINTENANCE
LIGHTING TOWER HYDRAULIC INTEGRATED | MANUAL
REV
.3-10/16
WIRE ROPES
Periodically check that the steel ropes of the mast are in per-
fect conditions. If there is evidence of wear, abrasion, broken
wires or loose connection do not use the lighting tower and
plan immediately the cables replacement .
CAUTION:
When replacing use ropes of the same type of the
originals. For this purpose, it is highly advisable to use original
spare parts
.
PULLEYS
Periodically check the regular rotation of the pulleys and the
correct position of the ropes on the pulleys. Periodically lubri-
cate with lithium multifunctional grease.
TELESCOPIC MAST
Check the regular movement of the mast during the raise and
the lowering. Periodically grease the mast with anti-corrosion
waterproof spray lubricant.
LAMPS
In case of need of replacement, do not directly touch the lam-
ps with your fingers, use a cloth or use cotton gloves. Pay
attention to the high temperature that the lamps reach during
operation: wait them to cool down before replacing.
TIRES
On the trailer/site-tow versions periodically verify the proper
tire pressure (2.2 bar).
ATTENTION
Any maintenance or troubleshooting must be carried out in
compliance with the requirements given in section: SAFETY
PRECAUTIONS DURING MAINTENANCE.
!
HYDRAULIC POWER PACK
A. Electric Motor
B. Bypass tap for manual lowering of the mast
C. Hydraulic fluid tank
•
Check the level and condition of the hydraulic fluid. Carry
out the check with the mast down and cool fluid.
•
It is recommended a first fluid change after the first 10
hours. Do the following oil changes within 3000 hours or
once a year.
• The hydraulic power pack is supplied from factory with
hydraulic oil type:
AGIP OSO 46
•
When topping up, it is important not to mix hydraulic fluids of
different manufacturers, or different types, which may cause
the formation of sludge and sediments that could affect the
proper operation of the power pack.
•
Each time you change the hydraulic fluid, replace (or wash
and clean) the inlet filter and do an internal cleaning of the
tank.
• For the oil replacement, use oils with a high viscosity index
and temperature range appropriate to the conditions of use.
LIGHTING TOWER MANUAL
MANUAL WINCH
the manual winch requires regular maintenance in particular
the parts that need to be lubricated.
Refer to the manual of use and maintenance of the winch
supplied with the lighting tower
A
B
C
IMPORTANT
In the maintenance operations avoid that pol-
luting substances, liquids, exhausted oils, etc.
bring damage to people or things or can cause
negative effects to surroindings, health or safety
respecting completely the laws and/or disposi-
tions in force in the place.
!
Содержание TF II9 Y
Страница 2: ......
Страница 45: ...11 01 01 Note NOTE...
Страница 46: ...11 01 01 Note NOTE...
Страница 47: ......