Mortara Surveyor Central 3.x, Руководство по обслуживанию

Страница: 5 / 56

Section 1
1-1
General Information
Service Manual Purpose
The purpose of this manual is to supply information to authorized service personnel so they can properly
maintain the Surveyor Central 3.x system. Information for peripheral devices, such as printers should be
found in manuals supplied with equipment or by contacting original manufacturer. This manual is
intended to function as the primary guide to preventive maintenance and electrical repairs considered
field repairable for the Surveyor Central system.
Manufacturer’s Responsibility
Mortara Instrument, Inc. is responsible for the effects on safety and performance of the device, as
indicated by the label, only if article 2 of 93/42/EEC directive is applied, in particular:

System installation and assembly operations, extensions, readjustments, modifications or repairs are
carried out by personnel authorized by Mortara Instrument, Inc. only.

The device is used in accordance with the instructions for use.

The device is correctly maintained according to the standards authorized by Mortara Instrument, Inc.
using original spare parts.

The device is used with original accessories and supplies that are in compliance with the standard
specifications described in this manual.

The electrical installation of the relevant room complies with the requirements of appropriate
regulations.
Responsibility of the Customer
The user of this device is responsible for ensuring the implementation of a satisfactory maintenance
schedule. Failure to do so may cause undue failure and possible health hazards. This manual must be
kept in a safe place to prevent its deterioration and/or alteration. The user and Mortara Instrument, Inc.
authorized personnel must have access to this manual at any time.
The user of this device must periodically check the transmitters, their functionality and the integrity of their
accessories.
Equipment Identification
Mortara Instrument, Inc. equipment is identified by serial and part numbers on the side, back, or bottom of
the device. Care should be taken so that these numbers are not defaced.
Copyright and Trademark Notices
This document contains information that is protected by copyright. All rights are reserved. No part of this
document may be photocopied, reproduced, or translated into another language without prior written
consent of Mortara Instrument, Inc.
Other Important Information
The information in this document is subject to change without notice.
1