Morris TTW-165, Инструкция по эксплуатации

Страница: 11 / 29

6
Step 2: select a certain level of salt consumption
Press the Star t/pa use button to select t he proper set according to your local environment,
the sets wil l change in the following sequence: H1->H2->H3->H4->H5->H6;
Step 3: Exit the status of salt adjustment
Wi thout an y operation in five seconds, t he machine will exit f rom set mode, the machi ne is into standby status
There are 6 levels of salt consumption in all.It is recom mended to select the level accor ding to below table:
Water Hardness level
Setting on the
water softener
Digital display stalls
dH
1)
2)
mmol/l
0-5 0-0.9
1
6-11 1.0-2.0
2
12-17
2.1-3.0 3
18-22
3.1-4.0
4
*
23-34
4.1-6.1 5
35-45
6.2-8.0
6
1) G erman degree of measurement for the water hardness
2) m illim ol, internationel unit for water hardness
*) factory se tting
Contact your local water board for information on the hardness of your water supply.
Rinse Aid Dispenser
The rinse aid is released during the final rinse to prevent water from forming droplets on your dishes. That can leave
spots and streaks. It also improves drying by allowin g w ater to sheet off the dishes. Your dishwasher is designed to
use liquid rinse aids. The rinse aid dispenser is located inside the door nex t to the detergent dispenser. To fill the
dispenser, open the cap and pour the rinse aid into the dispenser until the level indicator turns completely black.
The volume of the rinse aid container is about 110ml.
Function of Rinse Aid
Rinse ai d is automatically added during the last rinse, ensuring thorough rinsing, and spot and streak free drying.