34
MorrHeat - Most Heat In The Industry - Rev 3/18/2019
Attention
1. Remove smoke pipe and flue collector at back of boiler
2. Disconnect burner fuel lines as needed to open front door.
3. Remove all flue baffles.
4. Using the cleaning brush, scrub all fireside surfaces in combustion chamber, flue
passages and flue collector area.
5. Remove residue and vacuum clean.
6. Check condition of flue baffles and replace as needed.
7. Check front door and flue collector rope seals, replace as needed.
8. Re-assemble and put boiler into operation as needed.
NOTE
:
When the boiler is to be "layed-up" at the end of the heating season or out of service
for prolonged period of time.
A.
Make sure all surfaces are clean and dry.
B.
Open boiler front door and place a tray of calcium chloride
in the center of the furnace. This will absorb moisture and
keep the heat transfer surfaces dry. When calcium chloride
becomes mushy, replace with new.
C.
Block door approximately 1/4 open.
