29
Morley-IAS
996-203-000-2, Rev. 02
-
Press the
key to confirm the changes and exit back to the previous menu display. Press the
key to exit without saving any changes.
-
Confirmation is given that the new word has been added to the list, as shown below:
-
If the user tries to add a new word to the list which would exceed the word limit, a ‘Memory Full!’
warning is displayed, alerting the user that this word cannot be added to the list. Once the memory
is full, any such word will have to be typed in again each time it is required for text editing.
-
To display other word options that are not currently displayed, press the alphanumeric key which
contains the letters nearest to the desired word - this will advance the list of words starting with the
first letter on the pressed key, or the next letter if no words exist for the first letter, etc. (there are no
words in the default list beginning with G, H, I, J, M, Q, U, X, Y or Z). Alternatively, use the
/
keys to navigate down/up, one page at a time.
-
To program up to ten additional, site-specific words, after entering the new location text, e.g. PUMP
ROOM, press the
key again and the user is prompted to add the first word to the word list, as
follows:
-
To add the word ‘ROOM’ now to the list repeat the above procedure, except this time move the
cursor to the position just to the left of ‘ROOM’ before pressing the
key again.
-
If the user tries to add a word to the list that already exists the following message is displayed
momentarily and, consequently, the request is ignored.
www.acornfiresecurity.com
www.acornfiresecurity.com
