Morita veraviewepocs 2d, Инструкция по эксплуатации

Страница: 23 / 116

Panorama Exposures
19
(2) Cassette Insertion
Insert the PAN/CEPH cassette.
* This procedure is not required for panorama models since the
built-in X-ray detector is used with those models.
1. Hold the cassette with handle towards the front. Use the other
hand to support the bottom of the cassette and gently slide the
cassette into the holder.
2. When the cassette stops, press the button and slide the cassette
in slightly more, then release the button.
3. Slide the cassette all the way in until the rod goes into its
hole inside the holder. The rod will make and audible click
and the button will pop out.
A beep will also sound. After a few seconds the green LED
on the cassette will start to blink on and off.
Depending on the LAN set up, it may take longer for the
LED to start blinking.
Check the following points after inserting the cassette.
•
The button on the cassette is popped out and the red
ring is visible around the bottom of the button.
•
Without pressing the button, give a light tug on the
cassette and make sure it does not come out.
Rod
Hole
Red Ring
Button
LED
Holder
Handle