Morita veraviewepocs 2d Скачать руководство пользователя

Страница: 14 / 116

Beam On/Off Keys

Positioning beams automatically go off after 3 minutes. Press either one of these keys to turn them back on. Or

press one of them to turn the beams off.

Incisal Occlusion Key

This key is used to make a panorama exposure for a patient with standard occlusion biting on a mouthpiece. After

adjusting the height of the positioning (AF) sensor, press this key to automatically move the arm backwards or

forwards to the optimum position.

Natural Occlusion Key

This key is used to make a panorama exposure for a patient with standard occlusion without using a mouthpiece.

After adjusting the height of the positioning (AF) sensor, press this key to automatically move the arm backwards

or forwards to the optimum position.

Protruding Maxillary Occlusion Key

This key is used to make a panorama exposure for a patient with protruding maxillary without using a mouthpiece.

After adjusting the height of the positioning (AF) sensor, press this key to automatically move the arm to the

optimum position.

10.

Protruding Mandibular Occlusion Key

This key is used to make a panorama exposure for a patient with protruding mandible without using a mouthpiece.

After adjusting the height of the positioning (AF) sensor, press this key to automatically move the arm to the

optimum position.

11.

Frame Liquid Crystal Display (LCD)

Display various information including Ready mode, Image layer beam position, exposure mode, exposure

conditions, patient positioning guide etc.

12.

Frankfort Plane Beam Up/Down Knob

Turn the knob to the right to lower the beam or to the left to raise the beam. For panorama exposures, lines up

with the patient’s Frankfort plane.

13.

Auto Positioning (AF) Sensor Beam Up/Down Knob

Turn the knob to the right to lower the beam or to the left to raise the beam. Adjust the beam so it strikes the

center of the mouthpiece in the patient’s mouth.

Содержание veraviewepocs 2d





















































































































Результаты поиска

Содержание veraviewepocs 2d

Отзывы:

Похожие инструкции для veraviewepocs 2d

Бренды по названию

Популярные бренды

Morita veraviewepocs 2d, Инструкция по эксплуатации

Результаты поиска

Содержание veraviewepocs 2d

Отзывы:

Похожие инструкции для veraviewepocs 2d

Бренды по названию

Популярные бренды