mori seiki MSC-500, Руководство по обслуживанию

Страница: 20 / 89

DAILY INSPECTION A-13
9. PRECAUTIONS WHEN USING CHIP CONVEYOR
(1) Do not operate the chip conveyor intermittently.
Intermittent operation causes fine chips to accumulate between the belts and/or on
the conveyor bottom plates, resulting in conveyor malfunction such as tripping of
the thermal relay.
Always operate the chip conveyor continuously.
(2) The chip conveyor cannot carry materials larger than cutting chips.
If tools and other such materials are mistakenly placed on the conveyor during
operation, the chip conveyor will be damaged.
(1) Close the operator panel-side door before operating the chip conveyor.
(2) The chip conveyor cannot discharge all types of chips. Carefully consider appropriate
cutting conditions to generate chips which can be removed from the machining
chamber.
WARNING
(1) Do not operate the chip conveyor or perform maintenance and
inspection tasks without reading and obtaining a thorough
understanding of the contents of the chip conveyor instruction
manual "COOLANT FILTER MANUAL" published separately.
(2) Keep the chip conveyor instruction manual "COOLANT FILTER
MANUAL" on hand to enable immediate reference when operating the
chip conveyor and performing maintenance and instruction tasks.
(3) Do not place hands or feet inside the chip conveyor during operation
to prevent serious injury due to entanglement in rotating components
or by being crushed between moving parts.
CAUTION
NOTE