Morgana MB300 XL Pro Скачать руководство пользователя страница 46

Страница: 46 / 84

MB300 XL Pro

rev.0.2 ID03570

7. OPERATION AND USE

7.1 PREPARATION OF THE MACHINE

7.1.1 GLUE TANK LOADING

The glue tank must be filled in the case in which the amount of glue is less than the minimum level

imprinted on the tank.

CAUTION!

Wear face, hand, protection, mask suitable for using glue and

protective goggles.

CAUTION!

Never open the tank when it is COLD.

Possibility of breakage of the sealing gaskets and ageing and premature (curing)

of the glue with probable clogging and maintenance requirements.

CAUTION!

Only glue of the same Type and Brand must be added to the tank.

A new type of glue is only inserted when the glue unit is completely empty and
cleaned with Blu-Cleaner.

CAUTION!

With Polyurethane glue do not leave the tank open for more than 10

minutes.

CAUTION!

Never fill the tank with more than 3kg of glue.

To access the glue tank you have to open the sliding door provided with handle.

The opening of this protection sends the machine into a state of emergency and discharges the

pressure of the glue tank while the Cleaner tank remains at a pressure of about 2 bar.

The machine can not work with the back door open.

Содержание MB300 XL Pro





















































































Результаты поиска

Содержание MB300 XL Pro

Отзывы:

Похожие инструкции для MB300 XL Pro

Бренды по названию

Популярные бренды

Morgana MB300 XL Pro, Руководство оператора

Результаты поиска

Содержание MB300 XL Pro

Отзывы:

Похожие инструкции для MB300 XL Pro

Бренды по названию

Популярные бренды