N U M B E R E R
PAGE 31
WARNING
NEVER FIT NUMBERING HEADS FROM A PRESS OR
ANOTHER MANUFACTURERS NUMBERING MACHINE AS
SERIOUS DAMAGE
WILL
RESULT. YOUR MACHINE
REQUIRES HEADS DESIGNED TO RUN ON AN
OPERATING CIRCUMFERENCE OF 16.697”
10.5 .....Numbering Head - Dismantling
It may be necessary to dismantle the Numbering Heads from time
to time in order to clean them thoroughly or to replace the wheels
to allow skip or repeat numbering.
The following instructions are provided as a guide only and are
specifically for 60 & 70 series heads. As mentioned earlier,
Numbering Heads are precision instruments and should be
handled carefully.
Section 10
MAINTENANCE
Dismantling the Numbering Head.............................. Fig 10.51
