N U M B E R E R
PAGE 5
Section 1
INSTALLATION
When the machine is not in use, the Feed Bed may be withdrawn
and hung on the stowage hooks.
1.3 .......Stacker
The Stacker is fitted, by locating the support shafts each side into
the catch plates. Raising the end of the Stacker will allow it to fit. It
may then be lowered into position.
The height adjustment screws on each side may be positioned to
obtain the optimum height. It is recommended that only one screw
at a time (using a 5mm Allen key), is released when adjusting the
Stacker height.
When not in use, the Stacker may be hung on the stowage hooks on
the base of the machine.
With the Stacker removed,the exit guard will drop fully for the best
access to the output shafts.
NOTE...... The machine will not run with the Guards open or with the
Feed Bed removed.
Stacker Installation .................................................... Fig 1.31
