Morgana DocuFold Mk2, Руководство оператора

Страница: 20 / 28

Page 20
PAPER
PAPER WILL NOT STACK CONSISTENTLY:
Make sure the feed is consistent before attempting adjustments to the stacker.
Set the stacking roller position as described in the manual. Sometimes a small repositioning of
the roller will improve the stacking. See Stacking Roller.
If the paper is too curly when being delivered, place the catch tray and plug in perforating unit
with blades disengaged into position and deliver out the back. This applies to single fold
applications only. If two folds are required, you may need to reduce the weight of stock to
achieve the desired results.
PAPER WILL NOT DEFLECT WHEN USING ONE FOLD OR PERFORATING:
Check to make sure that the second plate is being used as the deflector.
Make sure that the plate is located securely and that the deflector bar is wound right to the end.
Set the tilt roller mechanism to zero.
Check that the material is not too heavy to deflect.
TOTALAND BATCH COUNTER NOT WORKING:
Clean the sensors as described in the manual.
O-LAP KEEPS APPEARING ON COUNTER BOARD
If the overlap keeps tripping in and cutting off the machine, first check you are not feeding
doubles and reset the feeder.
Overlap tripping can also mean that the machine is slowing slightly which may mean the
material is too heavy.
Check that you have no foreign bodies or torn paper stuck inside the plates or machine.
‘NO PLATE’ IN DISPLAY
Check fold plate or plug in perforator power connectors.
MACHINE WILL NOT RESET
Your Docufold is a mini computer; you must have a clean consistent power supply. Switch off
at power switch (S), wait 20 seconds and re-power.