Morgana DigiFold Pro Скачать руководство пользователя

Страница: 43 / 63

Page 43

SYSTEM

Perforating

*Perforator stripper

177-05-01

All of the blades and anvils are supplied with fixings.

Standard Part Number

*It is recommended that for multiple perforations, a separate perforator stripper is used for

every perforating blade set fitted in the creasing unit.

1. Turn the mains supply to the machine ‘off’.

2. Open the perforator assembly to get access to the drive wheels and hubs.

3. Locate and remove the blades / anvils from the despatch kit supplied with the

machine.

4. Using the 2mm allen key (supplied), loosen the drive wheel that is to accommodate

the blades.

5. Slide the drive wheel away from any obstructing drive wheels or hubs in order to

mount the blades.

6. Using the 2.5mm allen key (supplied), take one

half of the matching pair of blades and mount on
to the drive wheel. Do not secure the blade.

7. Mount the other half of the blade to the drive

wheel as shown (FIG 37.1). Secure the blades to
the wheel ensuring not to over tighten grub screw.

8. Mark on a single sheet the desired perforating

position. Feed the sheet through the machine

manually until the mark can be seen. Use this
mark to assist in fixing the position of the
perforating drive wheel to the roller drive shaft.

9. Using the 2mm allen key, loosen the drive hub

nearest the perforating drive. Slide the drive hub
away from any obstructing drive wheels or hubs
in order to mount the anvils.

10. Using the 2.5mm allen key, take one half of the

matching pair of anvils and mount to the drive
hub. Do not secure the anvil.

11. Mount the other half of the anvil to the drive hub

as shown (FIG 37.2). Secure the anvils to the drive

hub ensuring not to over tighten the grub screws.

Setting the machine

FIG 37.1

FIG 37.2

DigiFold Pro

Содержание DigiFold Pro
































































Результаты поиска

Содержание DigiFold Pro

Отзывы:

Похожие инструкции для DigiFold Pro

Бренды по названию

Популярные бренды

Morgana DigiFold Pro, Руководство оператора

Результаты поиска

Содержание DigiFold Pro

Отзывы:

Похожие инструкции для DigiFold Pro

Бренды по названию

Популярные бренды