Morgana DigiFold Pro, Руководство оператора

Страница: 4 / 63

INTRODUCTION
It is to note that to prevent cracking, when using dry ink or toner based print
engines, the material be fully acclimatised for at least 48 hours before putting an
image onto the paper.
Feeding System ................................................ Bottom suction feed
Max. Sheet Size ................................................ 700mm x 385mm (27.5” x 15”) [900mm x
385mm (35.4” x 15”) with Optional
extension table].
Min. Sheet Size ................................................. 210mm x 140mm (8.3” x 5.5”) (dependant
on stiffness of paper and type of fold).
Max. Paper Thickness ................................... 0.40mm (varies according to hardness,
type of fold, and substrate).
Min. Paper Thickness ....................................... 0.11mm
Max. No. Folds per Sheet.................................. 2
Max. No. Stored Programmes ...........................Unlimited
Min. Repeat Crease Distance.............................40mm (1.6”)
Min. Repeat Fold Distance ................................70
Min. Fold Distance from Leading Edge ............. 50mm (1.96”) (depending on paper weight)
Min. Crease Distance from Tail Edge.................50mm (1.96”)
IMPORTANT
must
IMPORTANT
Note:
the operating environment should be controlled to a temperature between
16° C and 27° C Maximum.
(varies according to hardness,
type of fold, and substrate).
Max. No. Creases per Sheet..............................9
mm (2.75”) (depending on paper weight)
Min. Crease Distance from Leading Edge..........50mm (1.96”)
Min. Fold Distance from Tail Edge .................... 50mm (1.96”) (depending on paper weight)
Min. Fold Length ............................................... 70mm (2.75”)
Speed per Hour (A4 in half)............................... 6000 sheets
Dimensions ....................................................... L: 2020mm H: 1265mm W: 680mm
L: (79.5”) H: (49.8”) W: (26.8”)
Weight ............................................................... 190Kgs (+50Kgs packing)
Power Requirement .......................................... 1 phase 220 / 240v 50Hz
Specification
The production speed varies according to the material size and
the fold type.
1 phase 220v 60 Hz
Sound Power Level .....................80.0 decibels
*As part of our continued product improvement plan, specifications and information
published in this manual are subject to change without notice.
All specifications are dependant on application, type of stock, temperature, RH and print
engine used.
Specifications quoted were measured on uncoated and unprinted stock. E & OE.
Page 4
FOLDING
DigiFold Pro
INTRODUCTION AND SPECIFICATION
Digifold Pro
DigiFold Pro
is a registered trade mark of Morgana systems Ltd. The unique patented
creasing and folding system, makes it possible to fold most delicate stocks from 0.11mm,
up to 0.4mm thick. The
reduces the possibility of scratching, marking or
cracking appearing on the substrate, as is often associated with conventional folding
machine methods.