Morgana Booklet Maker BM 61, Руководство оператора

Страница: 18 / 29

17
3. Operation
Operating the bookletmaker
Operating ON-line
1. Verify that the set up of the Booklet Maker is completed.
2. Select “third party output” on the Collator.
3. Press “calibration” on the Collator.
4. The set will enter the Booklet Maker and remain in the stapling section unstapled.
5. Verify that the set is completed/correct press the Collator start button.
6. Select speed with button as shown below. (Only possible with model 510)
Operating OFF-line
1. Select manual or automatic start.
Manual start: Make sure that the time delay is set to minimum. Press the manual start
button for each operation.
Automatic start:The set will automatically be stapled as it is inserted in the
BookletMaker.
2. When operating, insert one set at a time. Align the set with your fingertip. When
automatic mode is selected, set time delay to allow careful alignment.
Note
The manual start button will light up when the next set may be inserted.
High Speed
Safe Mode