Morgana Booklet Maker BM 61, Руководство оператора

Страница: 13 / 29

1. Basics
12
Paper Settings
Set up for non-standard paper sizes
1. Disconnect the Booklet Maker from the Collator by pressing the Docking Bracket
(green marked side).
2. Loosen the knob for adjustment to odd paper sizes.
3. Slide the Docking Bracket back to align it with the chassis in the Booklet Maker, it will
lock into place.
This procedure is to enable ON-line operation with paper sizes that deviate from the standard
A4/A3 and 81/2“x11”/11”x17” sizes.
1. Perform the setup of the Booklet Maker for the paper size.
2. Attach the Booklet Maker to the Collator, using the positioning holes on
tBookletMaker that best matches the paper size. (Green mark on rear side jogger as
close as possible to the Docking Bracket).
3. Loosen the knob for adjustment to odd paper sizes on the Docking Bracket.
4. Move the Booklet Maker sidewise until the green mark on the rear side jogger is
aligned with the green mark on the Collator.
5. Tighten the knob.
Reset to standard paper sizes