Morgana Booklet Maker BM 61, Руководство оператора

Страница: 15 / 29

2. Settings
14
1. Remove the upper pressure roller assembly.
2. Flip over the side jogger upper guides (both side joggers).
3. Lower the rear jogger unit by pressing the rear jogger unit forward and downwards
(green marked).
4. Open the top cover.
5. Set the side jogger to the correct paper size according to the scale.
6. Insert a set into the stapling area.
7. Move the rear side jogger up against the paper to verify that the side jogger aligns the sheets.
Note
When checking the alignment, do not squeeze the release handle, only push on top of the
side jogger at the green label, to simulate the jogging action that the BM 61 does during
run.
8. Turn the paper stop crank until the trail edge of the set is in line with the scale for
paper length.
9. Remove the set.
10. Position the stapler heads over the correct anvils.
11. Set the stapling switch to ON position.
12. Set the folding switch to ON position.
13. Close the top cover.
14. Set the power switch to ON position.
Stapling and folding
1. Same procedure as the last one, with the exception that on point 11 the switch is set
to OFF position and point 10 is not performed.
Folding
OFF-line