5
OPERATING INSTRUCTIONS
4
INSTALLERS GUIDE
• The appliance must be installed by qualified professionals only.
• Before installing the range hood, ensure that the appliance is correctly preset for the local conditions (voltage and
power plug).
• For safety reasons, remove all packing materials (plastic bags, screws, metal strips etc.) and keep them away from the
reach of young children.
• Do not attempt to alter or modify the technical features of the range hood as this can pose a safety hazard. The
manufacturer will not responsible for eventual damages, due to failure to observe the above instructions.
• This range hood has been designed to be wall-mounted above a Gas stove/Hob. Before commencing installation,
consideration should be given to how the installation is to be carried out, and ensuring adequate space and
clearances above the Gas stove/Hob.
a) Position of the flue.
b) Availability of earthed power.
c) The mechanical strength of supporting structures.
• We will always supply the best quality materials and we are confident that you will be satisfied with our product.
INSTALLATION
1. Use an electrical drill a diameter of 8mm.
2. Locate the two screw holes for the mounting brackets. The screw holes must be perfectly horizontal, and the centre
hole must be aligned with the proposed centre of the range hood.
3. Drill the holes and insert the wall plugs.
4. Secure the wall bracket to the top two holes drilled in the previous step using the screws provided.
5. Rivet the flexible ventilation pipe to the cover with the screws to hang the main frame.
6. Install the flexible pipe. Ensure the pipe is kept in its natural state. Ensure the joint is air-proof. Minimize the number
of bends and elbows to maximize the efficiency of the appliance.
Notes:
• The wall shutter is not included in the carton.
• The range hood can be ducted through a roof or through a wall.
INSTALLATION
FIRST TIME OPERATING INSTRUCTIONS
It is recommended to follow these instructions before operating it for the first time:
1. Install the oil cup by inserting it from the back to the front.
2. Insert the power plug into the power supply. A beep will be heard when first switched on.
3. Press the power on. Press the lamp button lightly. Test to see if the lamp functions properly.
4. Press the lamp button to switch off.
5. Press the fan speed buttons to ensure that the motor functions properly.
IMPORTANT
Shut off power completely if the following abnormalities are found during the above test:
1. Mainframe shakes
2. Inflated pipe becomes flexible
3. Motor makes an abnormal noise.
• Press the power switch to stop operations.
• Any repairs (including damage to main supply) should be repaired by an approved service technician. It is
IMPORTANT that only original parts should be used.
• Failure to follow the advice can affect the safety of your appliance.
IMPORTANT
1. Any installation work must be carried out by a qualified professional or competent person.
2. Install the side suction range hood on the wall above the Gas Stove/Hob firmly. Ensure a distance of at least 350mm
between the range hood and the Gas Stove/Hob. Install the top suction with curve glass. Ensure a distance of at least
700-900mm between the hood and hob.
3. Ensure that the ventilation pipe can reach the open air or enter into a cold air suction flue and check the joints are
airproof.
4. Earth the power supply (to be performed by a qualified electrician only).
5. The gas expelled from the range hood should not be discharged into the flue which is used to discharge the smoke
produced by burning coal gas or other fuels.
MCH-950ST(IM)021115_Layout 1 11/6/15 1:27 PM Page 3
