7
MAINTENANCE & CLEANING
6
CONTROL PANEL
1. Clean the mainframe and the filters regularly.
2. There are two variations of inlet filters on these models. Both are removable by pulling the lever on the adage of the
filters and lifting them out of the slots which hold them.
3. Wash the filters in a dishwasher, or by hand using household dishwashing liquid and clean it with a soft brush.
4. Allow filters to dry thoroughly before reinstalling them.
5. When reinstalling, ensure the filters are inserted in their correct positions.
6. Wipe excess dirt on the mainframe with a wet cloth and mild detergent. Wipe dry using a clean towel.
7. Do not use abrasive cleaners or other harsh cleansing agents as these will damage the surface.
8. Commercial stainless steel cleaning products are available for cleaning stubborn stains.
9. Wash the grease filters on a regular basis. It is recommended to wear gloves during cleaning.
10. Empty the oil and wash it clear before the oil cup is full.
11. Empty excess oil when the oil reaches 2/3 inside the oil cup.
12. If the range hood is unused for a long period of time, unplug it from the power supply.
13. Ensure power is turned off when cleaning the range hood to prevent accidents.
FROM LEFT TO RIGHT KEYS:
K1 Light
K2
3 speeds slide from Low-Medium-High
K3 Power
1. Connect the hood to electricity power, hood starts auto inspect for 1 second, and come into standby mode.
2. Speed control: press the Power button and it will illuminate. control the speed by sliding on the switch steps, the
corresponding speed will start working. Sliding from left to right will increase the speed, and the far right side is the
maximum speed. Sliding from right to left will decrease the speed while the far left side is to stop the speed.
Corresponding indicator light will lit during the sliding.
3. Delay-off control: press the Power button when the fan is on (any speed), the Power button will blink and the hood
fan will automatically turn off after 60 seconds. Lights will be turned off simultaneously.
4. Light control: press the Light button once to turn the hood lights on. Pressing the Light button again will turn them
back off.
MCH-950ST(IM)021115_Layout 1 11/6/15 1:27 PM Page 4