3
MORDAX : DATA
User Guide
SYS V. 01.00.00
BOOT V. 01.00.00
Updated: 161229
Soft Buttons, top row:
Referred to in this guide, left
to right, as 2-1, 2-2, 2-3, 2-4
Menu Button
: Pressing
this at any time will return
you to the main menu.
Push Encoder Knob:
Turn
the encoder to scroll through
parameters and change values.
Pushing the encoder often selects
and deselects items. In some
functions, pushing the encoder
while turning allows for coarse/fine
changing of values.
Output Jacks:
All outputs can p10V
to -5V Audio, CV, Trigger, or Gate signals.
Depending on the program running, all, none,
or a subset of the outputs may be utilized.
Similarly, the effective voltage ranges are
program dependent (see program-specific
instructions).
Buffered Through Jacks:
Regardless of the program
running, a signal present at an
Input Jack is buffered and sent
back out of its corresponding
Through Jack for use elsewhere
in your patch.
Input Jacks:
All inputs can
/-10V signals, though
depending on the program
running, the expected voltage
range and hardware signal path
may vary. Similarly, all, none,
or a subset of the inputs may
be utilized per program (see
program-specific instructions).
Soft Buttons, bottom row:
Referred to in this guide, left
to right, as 1-1, 1-2, 1-3, 1-4
DATA Overview
Typically you wouldn’t need to reset the DATA during operation, but it’s good to know you can do
so easily without interrupting power to the rest of your Eurorack system. You can reset the DATA
system at any time by simultaneously pressing the buttons 1-1, 1-4, 2-1, and 2-4 (the four corner
soft-buttons). This produces the same affect as power cycling the DATA by turning your Eurorack
system on and off, but effects only the DATA.
Front Panel Reset
