Mordax DATA Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 23

Mordax DATA Скачать руководство пользователя страница 7

7

MORDAX : DATA
User Guide

SYS V. 01.00.00

BOOT V. 01.00.00

Updated: 161229

Updating the Bootloader Firmware

This is a similar process to updating the system firmware, except that
you will go into the DATA’s Settings program to execute the update.

1. Got to www.mordax.net and download the latest DATA bootloader
firmware file to your computer. All DATA bootloader firmware .bin
files start with DB followed by 6 numbers, which indicate the version
number (e.g., DB010000.bin is DATA Bootloader Version 01.00.00).

2. Turn off the DATA, remove its microSD card and put the microSD
card in your computer (or if your computer doesn’t have a microSD
card reader, use a USB based reader, available at any electronics
retailer). You’ll see the card is named ‘MX_DATA’.

3. Take the downloaded DATA firmware .bin file and place it in the
mircoSD card’s root directory.

4. Eject the card and put it back into the DATA.

5. Power on the DATA. From the DATA’s main menu, hit button 1-4 to
access the Settings program.

6. The Settings program opens in the ‘Memory’ page. Hit button 2-2
to navigate to the ‘Miscellaneous Systems Items’ page. Then scroll
with the rotary encoder knob to select ‘Bootloader Firmware Update’
from the submenu. With this item highlighted, push in on the encoder
to access the Bootloader Update routine.

7. The Bootloader Update program will recognize the new firmware
and display the version number on the screen. Push button 1-1 to
start the update. Heed the notice on the screen; while this update
process is rather fast, if the bootloader update is interrupted before
completing, it may brick your DATA and would have to be returned to
Mordax HQ for service.

8. Once the firmware update is complete, the .bin source file will be
deleted from the card.

«
...
5
6
7
8
9
...
»

Содержание DATA
























Отзывы:

Нет отзывов