9
MORDAX : DATA
User Guide
SYS V. 01.00.00
BOOT V. 01.00.00
Updated: 161229
Basic patch memory is available for saving and loading the DATA’s system-wide settings. There are 8 memory slots used to take
a “snap-shot” of the DATA as it is currently configured. The Oscilloscope program’s channel positions and time value, the Wave
Output program’s waveform type and frequency, and the Clock Output program’s BPM can all be saved for later recall. This is
useful for recalling specific configurations for performances or moving between different test and measurement routines.
To save or load a system state:
1. From the DATA’s main menu, hit button 1-4 to access the Settings
program.
2. The Settings program opens in the ‘Memory’ page. Scroll with the
rotary encoder knob to select one of the eight available memory slots
to save or load.
3. To save the current system state to the highligted slot, press
button 1-1, under the display text ‘SAVE’. Saving to the memory
slot will automatically overwrite any previously saved state in that
slot. The display will show a message indicating that the save was
successful.
4. To load a saved state from the highlighted slot, press button
1-2, under the display text ‘LOAD’. This will change all values in all
programs to those set at the time the system was originally saved.
5. To copy a saved state from one slot to another, simply load the
saved state from its memory slot, scroll to highlight the slot you want
to copy to, then save it there.
Saving & Loading System State
