4
Vehicle Preparation
1.
Remove driver’s side lower dash
panels, located directly under the
steering column and ignition switch
bezel.
A. Pull down lower dash & remove.
B. Remove (2) screws from black
under dash panel & remove.
C. Remove ignition cylinder cover.
Carefully pry off using a small
screwdriver or similar tool. Do not
damage the panel.
Overview
The remote starter module harness will interface with the existing WK ignition
switch connector, two center-splice connections, three butt connections, and a
ground termination. Four wires will be routed through the cowl panel, to a hood-
mounted safety switch, horn, parking light, and tachometer connections.