Manual Part No: 930154-01
MD Electric Grill
- 21 –
Manual Rev No: 1
Service and Maintenance (cont.)
Removal of Three Heat Switch
1)
Turn Off the electricity supply.
2)
Remove the control knobs and the control panel (secured by 2 screws).
3)
Remove the two screws holding the switch bracket, then withdraw the bracket and switch.
4)
Disconnect the wires from the switch (taking note of there position).
5)
Finally remove the switch from the bracket.
6)
Replacement is a reversal of the above procedure – check wiring as described in “Routine
Maintenance Procedure”.
Removal of a Heating Element
1)
Turn Off the electricity supply.
2)
Remove the rear cover panel to expose the element terminals and disconnect the wires from the
element to be removed.
3)
From the inside of the grill, remove the two screws holding the element to the rear plate.
4)
Slacken the screw fixing the element at the front and remove the element.
5)
Replacement is a reversal of the above procedure.