The Interface Solution Experts
7
CPT
PC-Programmable Signal
Isolater/Converter
Figure 3. Use the PC Confi guration Software to program the CPT (HLPRG)
Confi guring the CPT
One of the benefi ts of this transmitter is that there are
no internal or external controls to adjust or settings
to change. All operating parameters are set using a
PC and Moore Industries’ Intelligent PC Confi guration
software.
The software settings are downloaded to the transmit-
ter in the form of a Confi guration File and stored in the
instruments’ memory. You can save a backup copy of
the fi le on your PC hard drive or disk. The transmitter
communicates with the PC through an RS-232 con-
nection to the PC’s serial port.
NO
COM
TO SERIAL
(COM) PORT
OF PC
INPUT
READY
ALARM
COM
COMPUTER
PROGRAMMABLE
TRANSMITTER
VOLTAGE
SOURCE
_
+
CURRENT
SOURCE
_
+
2-WIRE
TRANSMITTER
_
+
AC OR DC
POWER
SUPPLY
GND
NC
PC
+
–
MULTIMETER
OR
DCS
A -OUT
A +OUT
To USB
(COM)
Port of PC
(optional)
