Micron Gemini
0729-SOM-00004-01
Page 46 of 46
This will bring up the
[Network and Sharing Center]
which allows configuration of any
networks on the computer. Click on
[Change adapter settings]
on the left-hand pane.
A list of attached network devices should now present itself. Find the one which the Gemini
head is to be connected to and double-click on it.
The
[Local Area Connection] Properties
dialog should be displayed. Find the entry
labelled
[Internet Protocol Version 4 (TCP/IPv4)]
, select it and then click on the
[Properties]
button.
In the properties dialog which opens there will either be
[Obtain an IP address
automatically]
or
[Use the following IP address]
selected. If an IP address is
already present, make a note of it before changing any values since it will be needed if the
computer is ever restored to the previous network. Refer to appropriate section of this manual
for the correct IP addresses to use.
