Micron Gemini
0729-SOM-00004-01
Page 15 of 46
Assembling the Ethernet System
The assembly of the Ethernet system is similar to the process detailed in the Serial system
Step 1
Connect the Breakout assembly to the 10m Ethernet test cable, taking care to
properly align the Souriau connector and its keyway.
Step 2
The connector on the Gemini and the Power Supply cable should be connected,
similar to the instructions given for the Serial System setup (see ”Assembling the
Serial System”).
Step 3
The Ethernet system requires the RJ45 connector plugged into your computer
instead of the USB device.
If using the system for the first time or after installing new software. See “Setting the
computer IP address in Windows® XP” or “D - Setting the computer IP address in
Windows® 7 or Windows® 10” for information on setting up your computers Ethernet
network port.
