Micron Gemini
0729-SOM-00004-01
Page 30 of 46
Sacrificial Anode Information
There is a zinc alloy sacrificial anode fitted to the rear of the Micron Gemini which is intended
to prolong its active life when submerged for long periods of time.
The lifespan of the anode itself will vary greatly depending on the conditions it is exposed to,
so it may need to be changed on a relatively regular basis. As a minimum, Tritech International
Ltd recommend replacing the anode every year with the sonar in regular use.
To replace the anode, follow the guidance below:
Step 1
Remove the spent or damaged sacrificial anode
from your sonar with a cross head screwdriver.
Step 2
Open the replacement spare kit. Build the kit with
the plastic washer nearest the sonar, anode and
then the screw.
Step 3
Fit to the sonar and tighten up the screw.
Note
Spare anode kits can be purchased from Tritech International Ltd using
the part number:
S11882
