Micron Gemini
0729-SOM-00004-01
Page 13 of 46
Assembling the Serial System
Step 1
Connect the breakout assembly to the 10 metre serial test cable, making sure to
properly align the Souriau connector and its keyway.
Female connector of the breakout assembly
and male connector of the test cable
A correctly mated Souriau communications
cable
Step 2
Plug the connector end of the 10 metre serial cable into the Micron Gemini sonar,
following the connection procedure for the appropriate connector.
An Impulse™ cable ready to be mated to the
connector
A correctly mated Impulse™ cable
Step 3
Connect the power supply unit to the breakout assembly, making sure to properly
align the Souriau connector and its keyway.
Female connector of the power supply unit
and male connector of the breakout
assembly
A correctly mated power cable
Step 4
Plug the USB connector on the serial breakout assembly into your computer, once
this is done an orange LED will be dimly lit, indicating the system is ready to establish
communications
