MOOG ANIMATICS Smart Motor SM23166MT, Руководство пользователя

Страница: 19 / 32

Supported/Not-Supported Functionality
l
function is one of the following codes:
function Description
0 Set IP address
1 Set subnet mask
2 Set gateway
l
"string" is formatted as an IP address and entered as a string
For example:
IPCTL (0,"192.168.0.10") 'Set the IP address to 192.168.0.10
For more details on the IPCTL command, see the SmartMotor™ Developer's Guide . For details
on the Ethernet and USB ports, see the Class 6 SmartMotor™ Installation & Startup Guide .
Supported/Not-Supported Functionality
Supported Functionality
A small set of functions are supported for access to these basic SmartMotor operations:
l
Report commands: RPA, RSP, etc.
Report commands are shown in the SmartMotor Developer's Guide . They can be
identified by looking at the command lists (near the end of the guide) for commands
that begin with a superscript "R" character, for example:
R
PA,
R
SP,
R
PC etc.
Commands that begin with an "R" character that is not superscript are not report
commands, for example: RANDOM=, RESUME, RETURN, RETURNI, RUN, RUN?.
NOTE: Also, refer to the Not-Supported Functionality section.
For more details, refer to Example with a String Response on page 24 and Example with
a Numeric Response on page 25.
l
Assign a variable: a=400
For more details, refer to Example of Assigning a Variable on page 26.
Moog Animatics Class 6 SmartMotor™ Ethernet Serial Encapsulation Guide, Rev. B
Page 19 of 32