background image

RXM5010 Touchscreen Remote 

Installation and Operation Manual

Page 1

XG0675 - 151207

 

This kit should be installed by a qualified person.

 

Check local codes and read all instructions prior to 

installation.

Ensure that all power to the appliance is off at the electrical breaker or fuse 

before beginning installation. Ensure gas is turned off at the shutoff valve before 

beginning installation.

CAUTION

MODEL: RXM5010

General Information

This remote control system can be used for the 

Montigo R-Series and RP Series fireplaces. 

 

The system can be operated manually from the 

receiver using the slider switch.

®

C

US

Before You Begin

•  Please read all instructions carefully
•  We strongly recomment that all electrical service 

work be performed by a qualified electrical 

contractor.

• 

Check to ensure that all components required for 

installation are included in your package.

IF YOU CANNOT READ OR UNDERSTAND THESE INSTALLATION INSTRUCTIONS DO NOT 

ATTEMPT TO INSTALL OR OPERATE.

ON/OFF Touchscreen Remote with 110v 

receiver and battery for R-Series and 

 RP-Series Fireplaces

Some materials used in the manufacturing process of this product can 

expose you to Benzene which is known in the State of California to 

cause cancer and birth defects or other reproductive harm. For more 

information go to www.P65warnings.ca.gov

WARNING

Содержание RXM5010









Отзывы: