Montigo RXM5010, Инструкция по установке и эксплуатации

Страница: 6 / 8

Page 6
RXA5010 Remote
XG0675 - 151207
Operation
Figure 11.
Setting the childproof lock
___________________________________________________________________________________________________________
REV 5/27/11 Page 2 of 5 Skytech 5010
SETTING
0
F /
0
C SCALE
The factory setting for temperature is
0
F . To change this setting to
0
C , first press and
hold the ON button and the FLAME ICON on the transmitter LCD screen at the same time
for (5) seconds. Follow this same procedure to change from
0
C back to
0
F .
CHILDPROOF “LOCK-OUT”
This remote control includes a CHILDPROOF “LOCK-OUT” feature that allows the user to
“LOCK-OUT” operation of the appliance from the TRANSMITTER when it is in the “LOCK OUT” mode.
SETTING “LOCK-OUT”
1. To activate the “LOCK-OUT” feature, press and hold the ON and OFF icons on the LCD
screen together, for 5 seconds. The lock icon will appear on the LCD screen.
2. To disengage the “LOCK-OUT”, press and hold the ON and OFF icons on the LCD screen
together, for 5 seconds. The lock icon will disappear on the LCD screen and the system
will return to its normal operating condition.
NOTE: If the appliance is already operating in the ON mode engaging the “LOCK-OUT”
will not cancel the operating MODE. Engaging the “LOCK-OUT” prevents only the manual
operation of the TRANSMITTER
RECEIVER
When plugged into a standard 110-120 VAC receptacle, the remote receiver
operates on commands from the transmitter or from the slide switch on the top
of the receiver (This switch is to be used during a power outage to operate the
appliance manually). The remote receiver is manufactured with a “dry contact”
relay in its circuitry that operates like an on/off switch, however, no power or
current passes from the 110-120 VAC input side to the wires leading from the
output side of the remote receiver.
This 5010 remote control system can be used in simplified installations
to control a Millivolt gas valve without any additional relays or components.
OFF
ON
OFF
ON
To 120VAC input
Slide
Switch
OFF
REMOTE
ON
LEARN
VALVE
ANTENNA
REMOTE RECEIVER
Dry Contact
(2) 1/4” female
Connectors
Changing the Temperature Scale:
The factory temperature setting is Fahrenheit.
To change the setting to Celsius, simultaneously press
and hold the ON button and FLAME ICON on the LCD
screen for five seconds.
Repeat the procedure above to change back to
Fahrenheit.
Figure 10. Setting the Temperature Scale
___________________________________________________________________________________________________________
REV 5/27/11 Page 2 of 5
Skytech 5010
SETTING
0
F /
0
C SCALE
The factory setting for temperature is
0
F . To change this setting to
0
C , first press and
hold the ON button and the FLAME ICON on the transmitter LCD screen at the same time
for (5) seconds. Follow this same procedure to change from
0
C back to
0
F .
CHILDPROOF “LOCK-OUT”
This remote control includes a CHILDPROOF “LOCK-OUT” feature that allows the user to
“LOCK-OUT” operation of the appliance from the TRANSMITTER when it is in the “LOCK OUT” mode.
SETTING “LOCK-OUT”
1. To activate the “LOCK-OUT” feature, press and hold the ON and OFF icons on the LCD
screen together, for 5 seconds. The lock icon will appear on the LCD screen.
2. To disengage the “LOCK-OUT”, press and hold the ON and OFF icons on the LCD screen
together, for 5 seconds. The lock icon will disappear on the LCD screen and the system
will return to its normal operating condition.
NOTE: If the appliance is already operating in the ON mode engaging the “LOCK-OUT”
will not cancel the operating MODE. Engaging the “LOCK-OUT” prevents only the manual
operation of the TRANSMITTER
RECEIVER
When plugged into a standard 110-120 VAC receptacle, the remote receiver
operates on commands from the transmitter or from the slide switch on the top
of the receiver (This switch is to be used during a power outage to operate the
appliance manually). The remote receiver is manufactured with a “dry contact”
relay in its circuitry that operates like an on/off switch, however, no power or
current passes from the 110-120 VAC input side to the wires leading from the
output side of the remote receiver.
This 5010 remote control system can be used in simplified installations
to control a Millivolt gas valve without any additional relays or components.
OFF
ON
OFF
ON
To 120VAC input
Slide
Switch
OFF
REMOTE
ON
LEARN
VALVE
ANTENNA
REMOTE RECEIVER
Dry Contact
(2) 1/4” female
Connectors
Changing the Childproof Lock:
The remote control includes a childproof lock-out feature.
To activate the childproof lock, simultaneously press and
hold the ON and OFF icons on the LCD screen for five
seconds. The lock icon will appear on the LCD screen.
Repeat the procedure above to disenge the childproof
lock. The lock icon will disappear and the system will
return to normal operation.
Note:
the childproof lock prevents the transmission of the
RF signal from the remote. Engaging the childproof lock
while the appliance is operating will not turn the burner
off.