Montigo RXM5010, Инструкция по установке и эксплуатации

Страница: 5 / 8

Page 5
RXA5010 Remote
XG0675 - 151207
Operation
Figure 8. RXA5010 Remote Control
Figure 9. RXA5010 Operation
___________________________________________________________________________________________________________
REV 5/27/11 Page 1 of 5
Skytech 5010
Model: 5010
INSTALLATION AND OPERATING INSTRUCTIONS
INTRODUCTION
This SKYTECH remote control system was developed to provide a safe, reliable, and user-friendly remote control system for gas
heating appliances. The system can be operated manually from the transmitter. The system operates on radio frequencies (RF) within
a 20-foot range using non-directional signals. The system operates one of 1,048,576 security codes that are programmed into the
transmitter at the factory; the remote receiver’s code must be matched to that of the transmitter prior to initial use.
The transmitter operates on 4 AAA-size 1.5V batteries. It is recommended that
ALKALINE batteries always be used for longer battery life and maximum operational
performance. IMPORTANT : New or fully charged batteries are essential for proper
operation of the multi-function transmitter. Insert 4 AAA-size 1.5 V batteries into the
battery compartment on the back of the transmitter, positioning the (+) and (-) ends of the
batteries as indicated on the casing. When the batteries are inserted, the screen at right
(with similar numbers) will display.
Note: On initial start up if a LOW battery icon appears on
the screen, check the position of the batteries.
Note: Due to the sensitive temperature-monitoring
components in the transmitter, it may be necessary to
allow the transmitter to stabilize to room temperature
before accurate room temperatures are displayed on
the screen. If the transmitter is activated from a
severe cold condition, it can take up to fifteen minutes
for accurate temperature readings to appear.
1. BATTERY ICON - Battery power is low. Replace batteries within two weeks.
2. ON- Indicates the appliance is ON – Flame Icon
3. OFF - Indicates the appliance is OFF – NO Flame Icon
4. FLAME – Indicates burner/valve in operation.
5. ROOM – Indicates CURRENT room temperature.
6.
0
F indicates degrees Fahrenheit (º C indicates degrees Celsius).
7. LOCK – Child lock out.
8. RF SIGNAL ICON –Appears when the RF signal is being transmitted.
OPERATION FUNCTIONS
1. Touch anyplace on the screen and the screens blue back light will light up and stay on for (5)
seconds.
2. Touch the ON button on the LCD screen front of the transmitter to turn the appliance ON.
3. Touch the OFF button on the LCD screen front of the transmitter to turn the appliance OFF.
IF YOU CANNOT READ OR UNDERSTAND THESE INSTALLATION INSTRUCTIONS DO NOT
ATTEMPT TO INSTALL OR OPERATE
OFF
BATTERY
COMPARTMENT
BACK
FRONT
ON
OFF
ON
OFF
ON
1
8
4
2
3
7
6
5
OFF
ON
Remote Layout:
1.
Battery Icon
- Battery power is low. Replace batteries
within two weeks.
2.
ON
- Indicates the appliance is ON - Flame Icon
3.
OFF
- Indicates the appliance is OFF - NO Flame
Icon.
4.
Flame
- Indicates burner/valve is in operation.
5.
ROOM
- Indicates current room temperature
6.
°F
indicates degrees Fahrenheit (
°C
indicates de-
grees Celsius).
7.
LOCK
- Child lock out
8.
RF SIGNAL
- Appears when RF signal is being trans -
mitted.
___________________________________________________________________________________________________________
REV 5/27/11 Page 1 of 5
Skytech 5010
Model: 5010
INSTALLATION AND OPERATING INSTRUCTIONS
INTRODUCTION
This SKYTECH remote control system was developed to provide a safe, reliable, and user-friendly remote control system for gas
heating appliances. The system can be operated manually from the transmitter. The system operates on radio frequencies (RF) within
a 20-foot range using non-directional signals. The system operates one of 1,048,576 security codes that are programmed into the
transmitter at the factory; the remote receiver’s code must be matched to that of the transmitter prior to initial use.
The transmitter operates on 4 AAA-size 1.5V batteries. It is recommended that
ALKALINE batteries always be used for longer battery life and maximum operational
performance. IMPORTANT : New or fully charged batteries are essential for proper
operation of the multi-function transmitter. Insert 4 AAA-size 1.5 V batteries into the
battery compartment on the back of the transmitter, positioning the (+) and (-) ends of the
batteries as indicated on the casing. When the batteries are inserted, the screen at right
(with similar numbers) will display.
Note: On initial start up if a LOW battery icon appears on
the screen, check the position of the batteries.
Note: Due to the sensitive temperature-monitoring
components in the transmitter, it may be necessary to
allow the transmitter to stabilize to room temperature
before accurate room temperatures are displayed on
the screen. If the transmitter is activated from a
severe cold condition, it can take up to fifteen minutes
for accurate temperature readings to appear.
1. BATTERY ICON - Battery power is low. Replace batteries within two weeks.
2. ON-
Indicates the appliance is ON – Flame Icon
3. OFF - Indicates the appliance is OFF – NO Flame Icon
4. FLAME
– Indicates burner/valve in operation.
5. ROOM – Indicates CURRENT room temperature.
6.
0
F indicates degrees Fahrenheit (º C indicates degrees Celsius).
7. LOCK – Child lock out.
8. RF SIGNAL ICON –Appears when the RF signal is being transmitted.
OPERATION FUNCTIONS
1. Touch anyplace on the screen and the screens blue back light will light up and stay on for (5)
seconds.
2. Touch the ON button on the LCD screen front of the transmitter to turn the appliance ON.
3. Touch the OFF button on the LCD screen front of the transmitter to turn the appliance OFF.
IF YOU CANNOT READ OR UNDERSTAND THESE INSTALLATION INSTRUCTIONS DO NOT
ATTEMPT TO INSTALL OR OPERATE
OFF
BATTERY
COMPARTMENT
BACK
FRONT
ON
OFF
ON
OFF
ON
1
8
4
2
3
7
6
5
OFF
ON
How to operate:
Touch the anywhere on the screen and the screen's blue
back light with light and stay lit for five seconds. Touch
the ON button on the LCD screen to turn the appliance
ON. Touch the OFF button on the LCD screen to turn the
appliance OFF.