32
Operation
xg0227 - 112718
Remote Operation
The proflame 2 Transmitter controls the following
fireplace functions
(all functions may not be available)
:
1. Main Burner On/Off
2. Main burner flame modulation (6 levels).
3. Choice of standing or intermittent pilot (CPI/IPI).
4. thermostat and smart thermostat functions.
6. Fan speed modulation (6 levels).
the Proflame 2 transmitter uses a streamlined design with a
simple button layout and informative lcd display. A Mode Key is
provided to index between the features and a thermostat Key is
used to turn On/Off or index through Thermostat functions, see
Figure 27. Additionally, a Key Lock feature is provided.
The Proflame 2 System consists of the following elements:
1. Pilot Assembly
2. Proflame gas Valve.
3. Proflame 2 control Module
4. wiring harness
5. Variable speed fans (If applicable)
7. Proflame 2 remote control
8. battery Pack
9 Manual override switch
noTe: Can not be used with home automation systems.
sw1 = Programing button
led1 = Red diagnostic light
led2 = Amber Programing Remote control light
blue back lit lcd display
On/Off key
thermostat key
Up/Down arrow key
Mode key
not used
not used
cPI mode
(optional)
Room
temperature
low battery alarm
Key lock
transmission
Flame on
Fans
figure 27.
Proflame 2 Remote
figure 27.b
Proflame 2 Control Module
figure 27.c
Remote Control LCD Display
Do not expose remote control to temperatures below 0°C (32°F) or
above 50°C (122°F)
Property Damage Hazard. Excessive heat can cause property damage.
The appliance can stay lit for many hours. Turn off the appliance if it is
not going to be attended for any length of time.
WarNiNg
cautioN
SW1
LED1
LED2
thermostat
On/Off/State
set Point
Temperature/Level/State
not used
