10
Installation
xg0227 - 112718
note: when constructing the framed opening, please ensure there is
access to install the gas line when the unit is installed
Corner CL/CR:
Frame in the enclosure for the unit with framing
materials. The framed opening for the assembled fireplace is 48" wide,
x 44" high x 25 1/4" deep.
*:
Approximate dimentions to center. For best results mount non-
combustible stud onto unit, then bolt to 2x4 header and floor.
Corner Left
Corner Right
Corner Framing dimensions
Shelf over the fireplace, Rear vent
Shelf over the fireplace, Top vent
Alcove above the fireplace
figure 3.b
Combustible Framing for shelves over the fireplace, Rear vent.
figure 3.b
Combustible Framing for shelves over the fireplace, Top vent.
figure 3.b
Non Combustible Framing with alcove above fireplace, Top Vent.
exTerior
wall
non CombusTible sTud
inCluded wiTh uniT
exTerior
wall
CombusTible shelf
non-CombusTible
faCing
non-CombusTible
faCing
CombusTible shelf
non-CombusTible
maTerials, wiTh low
profile manTel / alCove
over fireplaCe
non-CombusTible
maTerials alCove
over fireplaCe
Ceiling level
43¾"
43¾"
44"
44"
48"
*
*
48"
25¼"
25¼"
59"
MIN.
1" MIN.
18"
MAX.
44"
44"
39
⅝
"
2"
13" MIN.
17½"
84" MIn.
46"
1" MIN.
1" MIN.
CombusTible header
non-CombusTible header
CombusTible
header
