13
Installation
XG0228 - 021419
Figure 8.b
+')17RS9HQW9HQWLQJ*UDSKIRUZDOOPRXQWHGWHUPLQDWLRQV
Figure 8.
7RS9HQWHGZDOOPRXQWHGLQVWDOODWLRQZLWKHOERZRQHrEHQG7KHYHQWUXQ
PXVWFRPSO\ZLWK9HQWLQJ*UDSKIRU7RSYHQWZDOOPRXQWHGWHUPLQDWLRQV
Selection of components and details of venting layout should adhere
to the following guidelines:
ȏ
Vent terminations must not be recessed in walls or siding.
ȏ
For Heat Shield requirements see Section 3-3.
ȏ
Once the proposed venting layout has been determined refer to
graph to ensure the layout is acceptable.
Notes Wall Mounted Terminations: TOP VENT
ȏ
All measurements for vertical or horizontal runs are measured from
center of the vent pipe.
ȏ
Venting runs must fall within the limits set by the venting graph.
+7RS9HQWLQJ*UDSK
0HDVXUHWKHYHUWLFDOKHLJKWIURPWKHȴUHSODFHKHDUWKWRWKHFHQWUHRI
WKHWHUPLQDWLRQDQGWKHKRUL]RQWDOUXQIURPWKHȴUHSODFHȵXHFROODUWR
WKHZDOOȵDQJHRIWKHWHUPLQDWLRQ3ORWRQWKH9HQWLQJ*UDSKZLWKDQ;
If the 'X' falls on or above the top boundary of the shaded area, the
installation is acceptable.
Wall mounted Terminations:
7KHIROORZLQJGHWDLOVDUHVRPHSRVVLEOHFRQȴJXUDWLRQVIRU:DOOPRXQWHG
terminations. See below.
+')19(17581
Figure 8.d
7RS9HQWHGZDOOPRXQWHG0XOWLHOERZLQVWDOODWLRQ7KHYHQWUXQPXVWFRPSO\ZLWK
9HQWLQJ*UDSKIRU7RSYHQWZDOOPRXQWHGWHUPLQDWLRQV
Exterior
Wall
Hearth
Termination
Heat Shield
0
HEARTH
12
12
0
60
36
120
72
96
132
Vertical Height (In.)
Horizontal Run (In.)
36
60
132
156
72
96
120
$FFHSWDEOHYHQWUXQ
within non-shaded area.
8QDFFHSWDEOHYHQWUXQ
within shaded area.
Section 3-3-1: Venting Layout: Wall Mounted Termination
41½" Min.
0D[IRUPLQLPXPYHUWLFDO
72"
Exterior
Wall
Rigid
Section
Flex
Section
Termination
Heat Shield
8½’ Min at Max.
Horizontal
15' Max.
for minimum
vertical
