19
Installation
XG0228 - 021419
+r&RUQHUΖQVWDOODWLRQ
$WWDFKDQ((/rHOERZGLUHFWO\RQWRWKHȵXHFROODUDQGDWWDFKLW
WRWKH((/FXWWKH0;7WRVXLW6OLGHWKHȴUHSODFHLQWRSRVLWLRQ
and attach to the termination.
+r&RUQHUΖQVWDOODWLRQ
$WWDFKDQ0(/rHOERZGLUHFWO\RQWRWKHȵXHFROODUDQGDWWDFKLW
WRWKH0(/FXWWKH0;7WRVXLW6OLGHWKHȴUHSODFHLQWRSRVLWLRQ
and attach to the termination.
+rRUOHVV&RUQHUΖQVWDOODWLRQ
Use an MTO-4 termination and an MFL-18 and a frame, if appropriate.
Flex may be turned to obtain desired degree of angle required but
PXVWQRWH[FHHGr
+rRUOHVV&RUQHUΖQVWDOODWLRQ
Use an MTO-4 termination and a MFL-2 (24" compressed length) and
a frame, if appropriate. Flex may be turned to obtain desired degree
RIDQJOHUHTXLUHGEXWPXVWQRWH[FHHGr
H34 rear vented corner installation is available for
NATURAL GAS UNITS ONLY
H34 rear vented corner installation is available for
NATURAL GAS UNITS ONLY
H34 top vented corner installation is available for
NATURAL GAS AND PROPANE UNITS
H34 top vented corner installation is available for
NATURAL GAS AND PROPANE UNITS
NOTICE
APPROVED
APPROVED
NOTICE
Min. Vent
center for
H34 - 41½"
Termination
5+6
Heat Sheild
5+6
Heat Sheild
5+6
Heat Sheild
5+6
Heat Sheild
0(/(OERZ
((/(OERZ
0(/(OERZ
0;7
0;7
Flue Collar
Flue Collar
Flue Collar
Termination
Termination
Termination
Flex Section
Flex Section
Flue Collar
6HFWLRQ&RUQHU