17
Installation
XG0228 - 021419
Figure 8.j
6WUDLJKWUXQ5HDU9HQWHGZDOOPRXQWHGWHUPLQDWLRQ
Figure 8.k
5HDU9HQWHGZDOOPRXQWHG0XOWLHOERZWHUPLQDWLRQLQVWDOODWLRQPXVWKDYHDPLQL
-
PXPYHUWLFDOULVHRI
Selection of components and details of venting layout should adhere
to the following guidelines:
ȏ
Vent terminations must not be recessed in walls or siding.
ȏ
For Heat Shield requirements see Section 3-3.
ȏ
Once the proposed venting layout has been determined refer to
graph to ensure the layout is acceptable.
Notes Wall Mounted Terminations: REAR VENT
ȏ
All measurements for vertical or horizontal runs are measured from
center of the vent pipe.
ȏ
Venting runs must fall within the limits set by the venting graph.
([DPSOH$$FFHSWDEOHΖQVWDOODWLRQ
If the vertical dimension from the hearth is 120" and the horizontal
UXQWRWKHZDOOȵDQJHRIWKHYHQWWHUPLQDWLRQLVWKLVZRXOGEHDQ
acceptable installation.
([DPSOH%8QDFFHSWDEOHΖQVWDOODWLRQ
If the vertical dimension from the hearth is 48" and the horizontal run
WRWKHZDOOȵDQJHRIWKHYHQWWHUPLQDWLRQLVWKLVZRXOGQRWEHDQ
acceptable installation.
([DPSOH&8QDFFHSWDEOHΖQVWDOODWLRQ
ΖIWKHYHUWLFDOGLPHQVLRQIURPWKHȵRRURIWKHȴUHSODFHLVDQGWKH
KRUL]RQWDOUXQWRWKHZDOOȵDQJHRIWKHYHQWWHUPLQDWLRQLVWKLV
would not be an acceptable installation.
+5HDU9HQWLQJ*UDSK
0HDVXUHWKHYHUWLFDOKHLJKWIURPWKHȴUHSODFHKHDUWKWRWKHFHQWUHRI
WKHWHUPLQDWLRQDQGWKHKRUL]RQWDOUXQIURPWKHȴUHSODFHȵXHFROODUWR
WKHZDOOȵDQJHRIWKHWHUPLQDWLRQ3ORWRQWKH9HQWLQJ*UDSKZLWKDQ;
If the 'X' falls on or above the top boundary of the shaded area, the
installation is acceptable.
REAR VENT RUN
Figure 8.i
5HDU9HQWLQJ*UDSKIRUZDOOPRXQWHGWHUPLQDWLRQV
0
HEARTH
12
12
0
60
36
120
72
96
132
Vertical Height (In.)
Horizontal Run (In.)
36
60
132
156
72
96
120
$FFHSWDEOHYHQWUXQ
within non-shaded area.
8QDFFHSWDEOHYHQWUXQ
within shaded area.
A
B
C
Hearth
Hearth
Termination
Flex or Rigid
Heat Sheild
PXT Extention
Max.
52''
Min.
23¼''
Min.
18''
Max.
30''
Max.
18''
Max.
18'' Max. horozontal
run with no vertical lift
