B-Series DV-2 Gas Fireplace
Page 25
Part No. XG0160 - 151125
Operation - Model B-Series DV-2-I
B-Series D*-2-I
To Turn Off Gas To Appliance:
Lighting Instructions:
1.
Turn off remote switch.
2.
Flip down the lower trim.
3.
Turn the switch on the gas control to "Off".
4.
Flip up the trim.
1.
STOP!
Read the safety information above on this
label.
2.
Flip down the lower trims.
3.
Turn switch on the gas control to OFF".
4.
Wait 5 minutes to clear out any gas. If you smell gas,
STOP!
Follow "B" in the safety information above on
this label. If you don't smell gas, go to the next step.
5.
Turn switch on the gas control to "ON".
NOTE:
This
unit is equipped with an ignition system that lights the
pilot burner automatically.
Do not attempt to light
the pilot by hand.
6.
Turn on wall switch.
7.
Flip up the lower trim.
8.
If the fireplace does not operate, follow the instructions
"To Turn Off Gas To Appliance" and call your service
technician or gas supplier.
Honeywell Electronic Ignition
Gas Control Switch
Shown in ‘ON’ Position
Gas
Inlet
