Connect plug from fan to switch
housing plug. Match the color strips
on the plugs.
29
Place the switch cap o ver the light kit
until the threaded rod is completely
through.
Install the keeper nut onto the
threaded pipe of the light kit.
26
27
Connect the white wire from the
switch cap to the white wire from the
light kit. Connect the bl ue wire from
the switch cap to the bl ack wire from
the light kit.
28
Remove the plastic insert from
the center of the switch cap .
25
Attach switch cap to fan b y lining up
4 screw holes and installing the 4
screws removed and saved from ear-
lier step. Tighten screws securely.
24
Connect 9 plug connectors together.
Match the color strips on the plugs.
23
For install
without Light
kit continue
with step 23.
For install with
Light kit go to
step 25.
Remove 4 screws from the switch
cap plate and save for later use.
22
Install switch housing to light kit b y
aligning keyslots and turning clock-
wise. Tighten 3 screws.
21
Remove 1 screwand save. Loosen
other 2 screws .Remove cap by
twisting and pulling down. Sa ve
screws.
20
The screws, washers, and motor
pads are pre-installed to the blade
holders. Attach blade assembly to
motor and tighten screws securely.
19
