English
31
29
ENGLISH
TECHNICAL PASSPORT
Electric oven
TIMER
1. Press the «MODE» button un-
til the indicator above the symbol
символом
2. Use the «+» and «-» buttons to
set the time when you want the signal
to sound.
3. A light signal will remind you
that the «sound signal» function has
been programmed.
4. When the programmed time is
reached, a signal sounds and the light
starts flashing.
5. Press any button to deactivate
the sound signal. The current time is
then displayed.
Programming the cooking time
1. Press the «MODE» button until the
indicator above the symbol
begins
to flash.
2. Set the cooking time using the
«+» and «-» buttons.
3. The indicator, which was pre-
viously flashing, will light up steadily,
indicating that the oven will switch off
automatically.
4. The current time is then dis-
played on the electronic clock.
5. Set the program and tempera-
ture switches to the positions you re-
quire.
6. After the set time has elapsed,
the oven switches off automatically.
After that, a signal will sound and
the light starts flashing.
7.
Press any button to deactivate
the sound signal. The oven will then
switch on.
8. To switch the oven off, set the
program and temperature switches to
position (programmer zero position).
Programming the cooking end time
1. Press the «MODE» button until the
indicator above the symbol begins to
flash.
2. Use the «+» and «-» buttons to
set the exact cooking end time.
3. The indicator, which was pre-
viously flashing, will light up steadily,
indicating that the oven will switch off
automatically.
4. The current time is then dis-
played on the electronic clock.
5. Set the program and tempera-
ture switches to the positions you re-
quire.
6. After the set time has passed,
the oven switches off automatically.
After that, a signal will sound and the
light starts flashing.
7.
Press any button to deactivate
the sound signal. The oven will then
switch on.
8. To switch the oven off, set the
program and temperature switches to
position (programmer zero position).
You can activate this function even
if you have already started cooking food
in the oven. To do this, follow all the rec-
ommendations above except point 5.
30
TECHNICAL PASSPORT
ENGLISH
Electric oven
Programming the cooking time and
automatic switch-off
1. Press the «MODE» button until
the indicator above the symbol be-
gins to flash.
2. Set the cooking time using the
«+» and «-» buttons.
3. The indicator, which was previ-
ously flashing, will light up steadily.
4. Press the «MODE» button until
the indicator above the symbol be-
gins to flash.
5. Use the + and - buttons to set
the time by which you would like the
oven to switch off.
6. The indicator, which was previ-
ously flashing, will light up steadily.
7.
Set the program and tempera-
ture switches to the positions you re-
quire.
8. The oven will remain switched
off. The indicators above the symbols
and
show that the oven has
been programmed.
9. Based on the data entered, the
oven switches on automatically and
runs for the programmed time.
10. After the set cooking end time
has passed, the oven switches off auto-
matically.
After that, a signal will sound and
the light above the symbol starts
flashing.
11. Press any button to deactivate
the sound signal. The oven will then
switch on.
12. To switch the oven off, set the
program and temperature switches to
position (programmer zero position).
Caution!
By pressing the «MODE» button,
you can see on the display which timer
function is programmed. You can make
changes with the «+» and «-» buttons.
When the desired timer function is
selected, the corresponding indicator
lights up.
In the event of a sudden power fail-
ure, the previously programmed func-
tions and the electronic clock will be
reset. After the power supply has been
restored, set the current time on the
clock and re-program the desired func-
tion.
Switching off the clock backlight
To switch off the clock backlight,
press the two buttons at the same time
and after a few seconds the backlight
turns off. Press any button to switch the
backlight on afterwards.
This function can only be used if the
clock shows the current time and the
oven has not been programmed with a
function (no symbols are shown on the
display).
