28
6.
Using a pair of scissors or side cutters, cut about an inch off the end of the filament,
then gently straighten the end of the filament. Squeeze the lever on the Extruder,
insert the filament into the bottom until you encounter resistance, then release the
lever.
7.
Rotate the Knob until the Auto Feed Filament option is highlighted, then press the
Knob to start the Loading Filament function. The Nozzle will heat to the target
temperature, if necessary, then will load the filament and extrude a small amount.
Clean the extruded filament.
8.
Rotate the Knob until the Continue option is highlighted, then press the Knob to
continue printing with the new filament.
Saving a Print
The MP Cadet printer features the ability save a print in progress, so that you can turn the
printer off and resume printing at a later time. Perform the following steps to save and
resume a print in progress.
1.
With the Printing... Screen displayed, press the Knob to display the Print Control
Menu.
