2. Once everything is connected, plug the included AC adapter into the DC
connector on the back panel. Plug the other end into a nearby AC power outlet.
3. Press the I side of the power rocker switch to turn power ON.
3.1.2 FIXTURE ADDRESSING
This controller is programmed to control 16 channels of DMX per fixture, therefore
the fixtures you wish to control with the corresponding Scanner buttons on the unit,
must be spaced 16 channels apart.
Please refer to your individual fixture's manual for DMX addressing instructions.
The table above refers to a standard dipswitch binary configurable device.
Fixture or Scanner #
Default DMX Starting
Address
Binary Dipswitch
Settings (Switch to the
ON Position)
1
1
1
2
17
1, 5
3
33
1, 6
4
49
1, 5, 6
5
65
1, 7
6
81
1, 5, 7
7
97
1, 6, 7
8
113
1, 5, 6, 7
9
129
1, 8
10
145
1, 5, 8
11
161
1, 6, 8
12
177
1, 5, 6, 8
3 OPERATING INSTRUCTIONS
3.1 Setup
3.1.1 SETTING UP THE SYSTEM
1. Using DMX cables, connect your intelligent lighting fixtures to the controller, as
specified in the fixture manual(s).
8
Содержание 612120
Страница 1: ......