3. Alternatively you can press a single CHASE button or several CHASE buttons in
sequence and all selected chases will loop in the order selected.
Note: Multiple selected chases will loop and run in the order originally selected.
4. Use the FADE TIMER to adjust the duration time.
3.6.2 RUNNING IN AUTO-MODE
Note: In Auto mode, programs will be triggered by the controller's
FADE TIME
and
SPEED
fader settings.
1. Press the AUTO/DEL button repeatedly until the AUTO LED turns on.
2. If a CHASE button is not pressed, the controller will automatically run a BANK
program.
3. Use the BANK UP and BANK DOWN buttons to change the BANK programs.
4. Alternatively you can press a single CHASE button or several CHASE buttons in
sequence. All selected chases will loop in the order selected.
5. You can adjust the time between steps by moving the SPEED fader and the
duration of the step by moving FADE TIME the fader.
3.6.3 RUN MULTIPLE CHASES SIMULTANEOUSLY
IMPORTANT! To avoid conflict between scenes running simultaneously that
control the same fixture attributes, consider creating individual color and gobo
chases.
1. Press and hold the AUTO/DEL button.
2. While holding down the AUTO/DEL button, press and release each CHASE you
want to run simultaneously.
3.6.4 BLACKOUT
Press the BLACKOUT button to set the lighting output of all fixtures to 0 or OFF.
18
Содержание 612120
Страница 1: ......
