5
SAFETY WARNINGS AND GUIDELINES
Please read this entire manual before using this device, paying extra attention to these
safety warnings and guidelines. Please keep this manual in a safe place for future reference.
•
This device is intended for indoor use only.
•
Do not expose this device to water or moisture of any kind. Do not place drinks or
other containers with moisture on or near the device. If moisture does get in or on
the device, immediately remove it from its power source and allow it to fully dry
before reapplying power.
•
Do not touch the device, the power cord, or any other connected cables with wet
hands.
•
Do not expose this device to excessive vibration, extreme force, shock, or
fluctuations in temperature or humidity.
•
Do not expose this device to excessively high temperatures. Do not place it in, on,
or near a heat source, such as a fireplace, stove, radiator, etc. Do not leave it in
direct sunlight.
•
Do not place or install this device in an area where it can be exposed to excessive
amounts of dust, humidity, oil, smoke, or combustible vapors.
•
Use only in a well-ventilated area. Do not use in close, confined spaces.
•
Prior to operation, check the unit and power cord for physical damage. Do not use if
physical damage has occurred.
•
Before plugging the unit into a power outlet, ensure that the outlet provides the
same type and level of power required by the device.
•
Unplug this device from the power source when not in use.
•
Take care to prevent damage to the power cord. Do not allow it to become
crimped, pinched, walked on, or become tangled with other cords. Ensure that the
power cord does not present a tripping hazard.
•
Never unplug the unit by pulling on the power cord. Always grasp the connector
head or adapter body.
Содержание 21666
Страница 1: ...MP Mini Delta V2 3D Printer P N 21666 User s Manual ...
Страница 16: ...16 MENU MAP ...
Страница 37: ...37 Infill Patterns Lines Grid Triangle Zig Zag Concentric Cross ...