Monoprice 21666, Руководство пользователя

Страница: 39 / 58

39
•
Support infill density (%): Determines the infill density for supports. The higher the
density, the stronger the supports.
•
Support Top Gap (mm): The distance between the top of the support and the
model surface. The smaller the distance, the more effective the support, but it is
more difficult to remove from the model surface, resulting in residual material on
the model surface. The larger the distance, the less effective the support, but it is
easier to remove from the model surface, resulting in a smoother surface.
•
Support Bottom Gap (mm): The distance between the bottom of the support and
the model surface. The effects of this parameter are the same as the effects of the
Support Top Gap (mm) parameter.
•
Distance X/Y (mm): The distance between the support and the model surface in the
horizontal plane. The effects of this parameter are the same as the effects of the
Support Top Gap (mm) parameter.
•
Enable Support: Check this box to use supports.
•
Support Top: Determines the thickness of the top layer of the supports.
•
Support Bottom: Determines the thickness of the bottom layer of the supports.
• Support Interface: Sets the percentage of infill used inside the supports.
•
Support Interface Infill Pattern: Use this drop-down list box to choose one of five
infill patterns for the supports, including Lines, Grid, Triangles, Zig Zag, and
Concentric. The pattern designs are the same as those of the infill patterns of the
same name.