Monometer Voice, Руководство пользователя

Страница: 36 / 57

70
71
Meter Display Segments
TEST STRIP
SYMBOL
Appears when the meter
is turned on.
BLOOD DROP
SYMBOL
Flashes when it is
ready to apply the
sample.
VOICE SYMBOL
Indicatea speaking
function is on/off.
TEST RESULT AREA
TIME
DATE
Displays glucose results.
A decimal point appears
when the measurement
unit is mmol/L.
LOW BATTERY
SYMBOL
Appears when the
battery power is low.
CTL SYMBOL
Appears when doing a
control test and indicates
that the result will not be
stored in the memory.
MEASUREMENT
UNIT
Appears with the test
result either in mg/dL
or in mmol/L .
KETONE WARNING
Appears when the
test result is equal or
higher than 240mg/dL
(13.3mmol/L).
SMILE SYMBOL
Appears when the test
result is within refer-
ence range.
MEMORY SYMBOL
Appears when you review
the memory.
DAY AVERAGE
Indicates that the displayed
test result is an average.
FACE SYMBOL
LOW/HIGH
SYMBOL
Both are result indica-
tors. They appear
together with the test
result which exceeds
the reference range.
Appearance of the Test Strip
This system measures the amount of sugar (glucose) in whole blood.
Blood is applied to the absorbent hole of the test strip and is automati-
cally drawn into the reaction cell where the reaction takes place.
Please see pages 84~91, “Testing Your Blood”, for complete instructions.
The test strip consists of the following parts:
Contact Bars
Insert this end of the test strip into the meter.
Push it in firmly until it will go no further.
Test Strip Handle
Hold this part to insert the test strip into the slot.
Confirmation Window
This is where you confirm if enough blood has been
applied to the absorbent hole of the strip.
Absorbent Hole
Apply a drop of blood here,
The blood will be sucked automatically.