Monogram ZIP360NH Скачать руководство пользователя страница 36

Страница: 36 / 52

STEP 10 INSTALL GRILLE PANEL

• Raise the access panel to the stop position.

• Loosen the screws on the side trim behind the frame.

Remove the bottom trim.

• Slide the panel over the metal baker panel and into the

trim.

• If necessary, tap with a wood block until the panel slips

under the top trim piece.

• Reassemble the bottom trim. Tighten the screws.
• Adjust the hinge spring to accommodate the panel

weight, if necessary.

Installation Instructions - Flush Installation

STEP 11 INSTALL ASSEMBLED PANELS

• Install custom handles according to the manufacturer’s

instructions. Custom handle trim kit is provided with this
unit.

FRESH FOOD DOORS
• Beginning with the right fresh food door, slide assembled

door panel into the trim on the door.

• Place the custom handle trim against the side of the

refrigerator door, aligned top to bottom. The holes in the

trim should align to the holes in the door.

• Attach the custom handle trim with the 4 screws previously

removed.

• Remove the paper backing from the mylar tape on the

flange trim cover. Place the flange trim cover onto the

custom handle trim. The tape will help hold the cover in

place. Use shims at the top and bottom of the flange trim

cover, between it and the door, making sure the flange

trim cover fits flush to the custom handle trim. Using the

4 screws provided in custom handle trim kit, secure the

flange trim cover with 2 screws at top and 2 screws at
bottom.

• Repeat these steps with the left fresh food door.

FREEZER DRAWER
• Slide the assembled panel into the drawer trim.
• Secure the original drawer trim using the original round

head trim screws.

2-sided

Mylar

Tape

Flange

Trim

Cover

Door

Handle

Trim

Door Trim and

4 Screws

Shims

Flange Trim Cover

and 4 Screws

Custom Handle

Trim and 4 Screws

Shims

Double-Sided

Mylar Tape

Located

on Back of

Flange Trim

Cover

Содержание ZIP360NH





















































Результаты поиска

Содержание ZIP360NH

Отзывы:

Бренды по названию

Популярные бренды

Monogram ZIP360NH, Руководство по установке

Результаты поиска

Содержание ZIP360NH

Отзывы:

Бренды по названию

Популярные бренды